Piston: Mahle Forged flat top
-5cc part #930200630, 415g, 1.125" CH
Rings: Mahle steel top ring, 1.0/1.0/2.0mm file fit.
Rods: Compstar 6" 4340 H-beam
Crankshaft: SCAT 4340 Forged
Bearings: King HP series
Block: GM core LT1 with Milodon splayed center mains and Milodon/ARP
main studs. Block is usually decked to about 9.010",
Bored/honed to 4.030", Painted with POR-15 engine paint
$3000 deposit required to start the project, $1000
more required mid-way, remainder due upon
Send me your heads and cam and I'll install them for an
additional $500 labor.
Callies custom Magnum crankshaft: +$1000
Callies Ultra I-beam rods: +1000