Piston: Mahle Forged
D-dish -16cc part #930210830, 435g, 1.125" CH
Rings: Mahle steel top ring, 1.0/1.0/2.0mm file fit.
Rods: Eagle 6" 4340 H-beam
Crankshaft: Eagle 4340 Forged
Bearings: King XPN series
Block: GM core LT1 with Milodon or ProGram splayed center mains and Milodon/ARP
main studs. Block is usually decked to about 9.010",
Bored/honed to 4.030", Painted with POR-15 engine paint
$3000 deposit required to start the project, $1000
more required mid-way, remainder due upon
Send me your heads and cam and I'll install them for an
additional $500 labor.
Callies custom Magnum crankshaft: +$1000
Callies Ultra I-beam rods: +1000