Piston: Mahle Forged
D-dish -16cc part #930210830, 435g, 1.125" CH
Rings: Mahle steel top ring, 1.0/1.0/2.0mm file fit.
Rods: SCAT 6" 4340 I-beam, 7/16" rod bolts
Crankshaft: Eagle or SCAT Cast
Bearings: King Stock series
Block: Your core LT1 with stock main caps and bolts. Block is usually decked to about 9.010",
Bored/honed to 4.030", Painted with POR-15 engine paint
$2000 deposit required to start the project, remainder due upon
Send me your heads and cam and I'll install them for an
additional $500 labor.
Engines 2015 , email Karl